Composite Door Lock Replacement
Composite doors offer a strong level of security that will ensure that you and your family are safe from intruders. However, like all doors they are susceptible to warping or expanding over time, creating problems with the locking mechanism.
A common problem is when the cylinder lock becomes sticky. This is typically due to the lock not properly lubricated. A Locksmith can repair, service and replace the door cylinder in order to make sure that your door is working properly.
Damaged Cylinder
It's an extremely stressful situation when your locks become damaged during a break-in. It's not just a threat to the security of your home, but you now need to find ways to fix them and ensure your home is secured. Thankfully, this doesn't mean you have to replace the entire mechanism, as composite door lock replacement is often simple. This is due to the hardware and furniture of a composite door is practically identical to UPVC doors, meaning the cylinder is able to be replaced without replacing the entire mechanism.
The cylinder is a part of the lock that is used to unlock a door. It is secured by the use of a key. In the event of a burglary, the lock could be cracked or broken and remain in the open position. This can be very frustrating and, in certain instances, the lock may need to be removed. In these instances it is recommended to hire a specialist locksmith who can to remove the broken cylinder and install a new one, helping you get your door functioning in the shortest time possible.
You can also apply the lubricant to loosen the cylinder. This can be accomplished by spraying a lubricant, such as WD-40 around the edge of the cylinder in order to ease it up. Once the cylinder is free, you can apply a screwdriver under the detents and remove them. This will allow you push the cylinder from the handle.
Another way to stop your cylinder from getting stuck is to simply lift the handle after closing your composite door. This will ensure that all locking points on your door are engaged instead of relying solely on the latch located in the middle of the door. This will also help to lower the risk of expanding or warping your door.
If you are experiencing a malfunctioning piston or other issue with your composite door it is recommended that you contact a local locksmith. Read Alot more can find the issue and fix or replace it within no time. For more information on the price this service could cost, visit our Locksmith Prices page.
Damaged Lock
Despite their excellent quality composite doors, they aren't impervious to the same problems as traditional front door locks. They also face issues such as warping, dropped hinges and locks that stick to the floor. The good thing is that these issues can be resolved by a few easy fixes.
If the lock isn't turning in any way, or simply not engaging or disengaged, these signs are a clear indicator that your lock is not in good working order. Not only can this compromise your home's security, it can also make it easier for thieves to get access to or hack into your home.
Most lock issues result from damage to internal components, therefore it's important to understand the most common causes of this kind of issue in order to to identify and repair them before they become more serious. This will save you from costly repair bills, and ensure your lock's longevity.
If your key is stuck in the lock or is unable to turn it will be a sign that the cylinder has to be replaced. It could be that the key has broken inside the lock. This could be a dangerous and expensive problem.
This issue could also be caused by a misaligned lock mechanism. This can sometimes be fixed by loosening the screws securing the strike plate, and then adjusting it so that it is properly aligned with the latch. Once you've accomplished this you can tighten the screws a second time and the lock will be back to normal.
If your lock is draughty, it could be due to the fact that the handle isn't lifted when closing the door. When you close the door, raising the handle when you shut the door will help to keep the locking points in place and lower the risk of warping and provide better support. Keep the handle up to ensure that the lock is lifted properly, and reduce the pressure on the latches as well as locking mechanisms. This is a relatively simple fix that isn't too difficult to do.
Broken Hinge
A broken hinge on your composite door can cause a variety of problems. One of the most common issues is that the lock can't engage with its bolts and keepers, preventing you from closing your door securely. It could also cause the handle to fall, and the door to rub against the frame. This can damage the seals and cause other issues with the locking mechanism.
Composite doors come with hinges that self-lubricate however, they can be prone to dropping due to general usage and wear and tear. Hinges can also be unbalanced over time due to temperature fluctuations or building settlement. This can also make the locking system more difficult to operate.
As time passes, your composite door's weather seals could begin to slip and crack. This could cause water to leak into your property and affect the energy efficiency of the home. Fortunately, this is easy to repair and can be accomplished by resealing the weather seals on your composite door.
As with all exterior doors and windows, composite doors may be susceptible to swelling and warping. The weather seals on a composite door are vital to ensure your home's insulation, comfort and security. However, if they aren't replaced or resealed correctly it could lead to cracks, gaps and leaks.
If your composite slamlock is stuck, it's possible the gearbox or internal mechanism has broken. This can be difficult to identify since the handle might not appear to be working, but when the internal mechanism has failed it will need replacing.
It's important that you call an experienced Locksmith in the event that your composite door has a swelling. They'll be able determine the cause and then fix it. They can fix or replace your gearbox, and ensure that all locking points are engaged on your composite door. This will lower the chance of the door becoming over-inflated by rain or wind and help keep it in place.
Frame Damaged
If you replace your lock, but not replacing the frame of the door, you may find yourself with a difficult to open and close the door. A damaged frame could result in your energy costs to increase because air cannot get in or out. To prevent this problem make sure you inspect the condition of your door every six months and look for signs of damage.
The frame is the foundation of everything else, which is why it's vital to keep an eye on it. This is evident when the body panels aren't aligned correctly. This could make it difficult for you to shut or open your doors.
Another common sign of this problem is corrosion and rust which can make your vehicle appear unattractive. These problems can also impact the safety of your vehicle, as a damaged chassis will put stress on the other components.
A damaged frame could be the reason behind suspension problems. If the frame is bent it could cause the shock absorbers to be out of alignment, which can cause uneven tire wear and instability during driving. If you notice this problem, it's essential to seek professional help and fix it as quickly as possible.
It's simple to avoid a frayed frame. To safeguard your door from damage and keep it looking nice you should consider a composite door. It is more expensive than the traditional uPVC or timber door, but the investment is worthwhile because it's robust and energy efficient features that can save you money on energy bills. To learn more about the advantages of this type of door, go to our page. Then, once you've found the ideal door for your home, be sure to secure it with a quality multipoint lock. Fullex's Crimebeater Composite Door Lock is a fantastic option, ensuring the highest security with minimum effort. Order yours now! We offer free shipping on all orders.